18/410 PP Lotion Pump for Cosmetic and Skincare Packaging
This 18/410 lotion pump is a compact dispensing component for cosmetic and skincare packaging. The confirmed construction uses PP material, with an overall pump size of approximately 40 mm in height and 20 mm in diameter and a unit weight of approximately 8 g.
The pump is operated through a press-down actuator. Its 18/410 neck specification provides the primary technical reference when evaluating a matching bottle, while the complete bottle, pump, dip tube, and formula combination should still be confirmed during sampling before bulk production.
- Neck Size: The confirmed neck specification is 18/410.
- PP Construction: The confirmed pump material is PP.
- Pump Dimensions: Approximately 40 × 20 mm based on pump height and diameter.
- Unit Weight: Approximately 8 g per pump.
- Dispensing Method: Press-down actuator operation.
18/410 Neck Specification and Bottle Matching
The confirmed 18/410 neck specification is an important starting point for packaging development. When selecting a matching container, buyers should evaluate the pump together with the bottle neck, dip-tube requirement, formula characteristics, and final assembled package rather than relying only on the nominal neck designation.
A bottle with an 18/410 neck can be evaluated with this lotion pump, but the neck size alone should not be treated as a guarantee of final assembled performance. Bottle thread geometry, pump construction, dip-tube length, and the filled formula can all affect the finished packaging configuration.
Press-Down Dispensing for Lotion and Cosmetic Packaging
The actuator is used by pressing downward on the pump head, providing a straightforward dispensing format for cosmetic and skincare packaging projects. The compact 18/410 configuration can be considered where a smaller pump profile is preferred for the overall bottle design.
The exact output per stroke has not yet been confirmed for this model. Output should not be estimated solely from the 18/410 neck size because pumps sharing the same neck specification may use different internal pump-engine structures. Buyers with a specific dosage requirement should confirm the measured output before approving the final component specification.
Formula characteristics should also be considered during pump selection. Lotions, emulsions, serums, and other cosmetic formulations can vary in viscosity and dispensing behavior. Sampling with the intended formula is therefore useful when determining whether the selected pump configuration is appropriate for the finished package.
Pad Printing Laser and UV Decoration Options
Confirmed customization options for this lotion pump include pad printing, laser marking, and UV decoration. These processes can be evaluated when a cosmetic or skincare packaging project requires a logo, brand mark, or decorative detail on the visible pump component.
- Pad Printing: Can be evaluated for logos or graphic details on suitable areas of the pump.
- Laser Marking: Available as a customization option according to the selected design and pump surface.
- UV Decoration: Can be considered for customized visual effects according to approved artwork.
- Artwork Confirmation: Logo position, size, color, and final appearance should be approved through sampling before production.
These processes are available customization options and should not be interpreted as finishes already applied to every standard pump. Final decoration should be determined according to the selected artwork and approved physical sample.
40 × 20 mm Pump Dimensions for Packaging Evaluation
The confirmed overall pump dimensions are approximately 40 mm in height and 20 mm in diameter. These dimensions provide a useful reference when evaluating the visual relationship between the pump, bottle shoulder, neck area, label position, and overall packaging profile.
Dimensional evaluation is especially relevant when the pump will be combined with a compact skincare or cosmetic bottle. Buyers can use the dimensions as an initial packaging reference while confirming the final production specification against the approved component drawing and physical assembly.
1,000 Piece MOQ for Custom 18/410 Lotion Pump Projects
The confirmed minimum order quantity for this 18/410 PP lotion pump is 1,000 pieces. For customized orders, buyers can prepare the required quantity together with the selected bottle specification, artwork, decoration method, and other assembly requirements needed for sample approval.
FOLOVER PACK supports wholesale lotion-pump and cosmetic-packaging projects based on the confirmed 18/410 neck specification, PP construction, and available pad printing, laser marking, and UV decoration options. Bottle and pump selection can be coordinated according to the intended packaging configuration, with the assembled package reviewed before bulk order approval.
For projects that require a defined dosage, the pump output should be confirmed separately. The exact dispensing volume for this model is not yet confirmed and should not be assumed from the 18/410 neck size.
