18/410 Fine Mist Spray Pump with 0.12cc Controlled Output
This black 18/410 fine mist sprayer uses a compact finger-operated pump configuration suited to bottle packaging where a small closure profile and controlled spray dispensing are required. The structure combines a press actuator, threaded screw closure, and dip tube, giving packaging buyers a straightforward dispensing component for compatible mist spray bottle projects.
The confirmed output is 0.12cc per complete actuation. This relatively small metered dose is an important specification when comparing fine mist spray pumps because it defines the nominal liquid quantity delivered with each press. Output should not be confused with spray particle size, spray angle, or formula compatibility; those characteristics depend on the complete pump-and-formula combination and should be evaluated during sample approval.
18/410 Screw Neck and Dip Tube Packaging Structure
The confirmed 18/410 threaded neck is the primary interface between this spray pump and the selected bottle. For packaging development, however, the neck designation should be treated as the starting specification rather than the only compatibility criterion. Buyers should evaluate the actual bottle neck, closure engagement, container height, and required dip-tube reach as one assembled system.
- 18/410 neck finish: The sprayer uses a screw-on closure intended to be evaluated with a corresponding 18/410 bottle neck.
- 0.12cc dispensing output: The confirmed dosage provides a defined reference for comparing mist spray pumps during component selection.
- 딥 튜브: A tube is included with the pump, while its final required length should be matched to the selected bottle.
- 5g component weight: The confirmed pump weight can be included when calculating component weight and the approximate weight of the complete packaging set.
- Finger-operated actuator: The compact press-down format differentiates this component from larger lever-operated trigger sprayers.
Compact Fine Mist Sprayer for Mist Spray Bottle Packaging
The compact proportions of an 18/410 pump make the closure particularly relevant when a packaging concept does not require the larger visual footprint of a trigger head. The handheld view allows procurement and packaging teams to judge the relative scale of the actuator, threaded collar, and tube before selecting a bottle. This is useful when developing smaller cosmetic, fragrance, personal-care, or other compatible liquid packaging formats.
For buyers searching for an 18/410 mist spray bottle closure, the confirmed 0.12cc output is useful for narrowing the pump specification, but the intended user experience must still be considered. A low-volume fine mist pump and a trigger sprayer are not interchangeable simply because both spray liquids. The correct choice depends on the desired dosage, actuation style, bottle configuration, and actual formulation.
Matching the 18/410 Sprayer with the Selected Bottle
Successful component selection requires the pump and bottle to be reviewed as a complete package. Begin by confirming that the proposed container uses the required 18/410 neck finish, then establish the appropriate dip-tube length from the actual bottle geometry. Container height and internal base position influence where the tube should terminate, so the tube specification should not be selected from the neck diameter alone.
Packaging teams should also evaluate the completed assembly with the intended liquid. Formula viscosity and composition can influence the practical dispensing experience, while the bottle proportions affect both tube configuration and package appearance. A physical sample therefore provides a stronger basis for approval than selecting an 18/410 spray pump only from its catalog neck specification.
Wholesale 18/410 Mist Sprayer Supply for B2B Packaging Projects
FOLOVER PACK supports wholesale mist sprayer sourcing and coordinated bottle-and-closure packaging development around confirmed buyer requirements. The confirmed MOQ for this black 18/410 fine mist sprayer is 100 pieces. If a project requires alternative colors, surface treatments, special tube dimensions, different materials, or other modifications, those requirements should be submitted for feasibility confirmation because they are not confirmed standard options for this product.
For an efficient wholesale inquiry, buyers should provide the required quantity, bottle neck specification, bottle height, bottle drawing or physical sample, intended liquid, and target dispensing experience. These details allow the spray pump, tube, and bottle to be evaluated as one package and reduce uncertainty during sample selection. Buyers developing a mist spray bottle range should also identify whether the same pump will be used across multiple bottle capacities, since each container may require a different tube configuration.
For procurement comparison, the confirmed decision points for this component are the 18/410 threaded neck, 0.12cc output, 5g weight, black configuration, screw closure, and included dip tube. Final purchasing approval should then be based on the intended bottle and formula instead of assuming that every fine mist sprayer or every bottle carrying an 18/410 designation will perform identically.
